User`s manual

ZEBEX INDUSTRIES INC.
Delimiter Set Function
Delimiter is the symbol used between each field and at the end of each record.
Without it, all data will be mesh together, making it unusable. Here you can choose
the character you want to add between each data field, and the action to take after
each line of record. You can also decide whether to send the header of task file or
not.
Fig 50 Fig 51 Fig 52
In Fig 50 Field Delimiter setup is shown. The default is (，); press or
to adjust ；, Space or None. After confirmed press Ｅ to go to Fig 51.
In Fig 51 Record Delimiter set up is shown. The default is (，); press
or to adjust CR, LF, or None. After confirmed press Ｅ to go to Fig
52.
In Fig 52 Upload Header setup is shown. Press or to adjust Off or
On. After confirmed press Ｅ to leave the screen.

Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 45 / 50