User`s manual
ZEBEX INDUSTRIES INC.
Subject Version DatePage
Z-2121 series User’s Manual 4.00 2012/7/20 47 / 50
3. Enter the password for Bluetooth connection. Please see the
Upload/Upload Device section for instructions on setting Bluetooth
password. Click OK after you enter the password. Fig 3 appears.
Fig 3
4. Click Yes in Fig 3 to allow connection. A message appears as shown
in Fig 4 notifying the COM port used.
5. To receive data on PC, use a program such as the Hyper Terminal
with the appropriate COM port settings to connect the PC to the data
collector. Please see the System Setup/Communication section for
more details.
Bootloader Function Quick Start Guide
Please note that once you entered the Bootloader function you must
complete the update and/or the reset before you can exit the function. All
data stored on the device will be lost.
Firmware update
Please download and install the latest firmware and firmware update tool from the
ZEBEX website before you begin.
1. Press Ｆ1＋Ｆ2＋PW when the device is off to enable the Bootloader function
as shown in Fig 1.
Fig 1