User`s manual

ZEBEX INDUSTRIES INC.
In Fig 8 press any key to go to the next screen.
In Fig 9 total field is shown, enter the number from 1 to 16, after
confirmed press Ｅ to enter into Fig 10.
In Fig 10 input device setting is shown, press or to adjust Scan
only, Keyin + Scan, Keyin Only. After confirmed press Ｅ to enter into
Fig 11.
In Fig 11 field length is shown. Enter the field length from 1 to 32. After
confirmed press Ｅ to enter into Fig 12.
In Fig 12 prompt is shown. Enter the message for the prompt. After
confirmed press Ｅ to enter into Fig 13.
In Fig 13 field editing s shown. See the chart below to enter ndaulcp to
set the format. After confirmed press Ｅ to enter into Fig 14.
In Fig 14 delay is shown. Enter the number to set the delay. After
confirmed press Ｅ to enter into Fig 15.
In Fig 15 time stamp s shown. press or to adjust None, Short,
Long. After confirmed press Ｅ to exit.
Delete Data Function
Fig 16
In Fig 16 is asked for deleting the data download from the PC or not, press
M2 is YES, press again is NO, after confirmed press Ｅ to leave the
screen.

Subject Version DatePage
Z-2121 series User’s Manual 2.00 2011/4/12 26 / 49