User`s manual

ZEBEX INDUSTRIES INC.
In Fig 26 is shown to set up the interface, the default is RS-232, press ,
or to adjust BT or USB, after confirmed press Ｅ to enter into
Fig 27.
In Fig 27 is shown to set up the speed, press , or to adjust
576000, 38400, 19200, 9600, 4800, 2400 or 8, after confirmed press
Ｅ to enter into Fig 28.
In Fig 28 is shown to set up the parity, press , or to adjust even,
odd, mark or space, after confirmed press Ｅ to enter into Fig 29.
In Fig 29 is shown to set up the data bit, after confirmed press Ｅ to
enter into Fig 30.
In Fig 30 you can setup stop data bit, after confirmed press Ｅ to exit.
Field Delimiter Function
Fig 31
In Fig 31 is shown to set up Field Delimiter, the default is (，), press ,
or to adjust ；, Space or None, after confirmed press Ｅ to leave
the screen.
REC. Delimiter Function
Fig 32
In Fig 32 is shown to set up the interface, the default CRLF, press ,
or to adjust CR, LF or None, after confirmed press Ｅ to exit.

Subject Version DatePage
Z-2121 series User’s Manual 2.00 2011/4/12 31 / 49