User`s manual

ZEBEX INDUSTRIES INC.
Delimiter Set Function
Fig 50 Fig 51 Fig 52
In Fig 50 is shown to set up Field Delimiter, the default is (，), press
or to adjust ；, Space or None, after confirmed press Ｅ to go to
Fig 51.
In Fig 51 is shown to set up Record Delimiter, the default is (，), press
or to adjust CR, LF, or None. After confirmed press Ｅ to go to
Fig 52.
In Fig 52 is shown to set up Upload Header. Press or to adjust
Off or On. After confirmed press Ｅ to leave the screen.
Upload Device
Fig 53
In Fig 53 is shown to set up Com Port. Press or to adjust RS232,
BT, or USB. After confirmed press Ｅ to leave the screen.

Subject Version DatePage
Z-2121 series User’s Manual 2.00 2011/4/12 37 / 49