User`s manual

ZEBEX INDUSTRIES INC.
After finish the setting, when press SCAN key once, the display of Hyper
Terminal as Fig 8 will show on USB TEST. Press any key in the PC, and
the display will show on L, and then press Ｅ to leave the screen.
SRAM Function Test
Fig 10 Fig 11
In Fig 10 is shown for SRAM function test. When last screen is entered
into the screen, there will be a bee after test finished. If there is any
problem, the screen will show on error message and bee once as Fig 11,
after confirmed press Ｅ to leave the screen.
Main Battery and Backup Battery Function Test
Fig 12
In Fig 12 is shown for Main Battery and Backup Battery function test. Vbat
in shown on the volt of main battery, Bbat is the volt of backup battery.
Barcode Scan Function Test
Fig 13 Fig 14 Fig 15

Subject Version DatePage
Z-2121 series User’s Manual 2.00 2011/4/12 43 / 49