User`s manual

ZEBEX INDUSTRIES INC.
In Fig 10 prompt is shown. Enter the message for the prompt. After
confirmed press Ｅ to enter into Fig 11.
In Fig 11 field editing is shown. See the chart below to enter ndaulcp
to set the format. After confirmed press Ｅ to enter into Fig 12.
In Fig 12 delay is shown. Enter the number to set the delay. After
confirmed press Ｅ to enter into Fig 13.
In Fig 13 time stamp is shown. Press or to adjust None, Short,
Long. After confirmed press Ｅ to exit.
Delete Data Function
Fig 14
In Fig 14 press M2 to select YES or NO for deleting data downloaded from
PC. After confirmed press Ｅ to leave the screen.
Delete Task Function
Fig 15
In Fig 15 press M2 to select YES or NO for deleting task downloaded from
PC. After confirmed press Ｅ to leave the screen.

Subject Version DatePage
Z-2121 series User’s Manual 3.2 2013/10/04 25 / 44