User`s manual
ZEBEX INDUSTRIES INC.
RS232
Fig 24 Fig 25
Fig 26 Fig 27
In Fig 24 Baud Rate is shown for speed setup. Press or to adjust
115200, 57600, 38400, 19200, 9600, 4800, 2400 or 1200, after
confirmed press Ｅ to enter into Fig 25.
In Fig 25 Parity Check is shown. Press or to adjust even, odd,
mark or space. After confirmed press Ｅ to enter into Fig 26.
In Fig 26 data bit setup is shown. After confirmed press Ｅ to enter
into Fig 27.
In Fig 27 you can setup stop data bit, after confirmed press Ｅ then
press M1 to exit.
Subject Version DatePage
Z-2121 series User’s Manual 3.2 2013/10/04 30 / 44