User's Manual

148603 Project Document
148603 Specification and Integration Guide
Copyright 2012 Motorola Solutions, Inc. 20110610-i 18 of 36
Confidential Material – Disclosure Strictly Prohibited. "Ni ckel Leucochroic Puffin"
5. Host Requirements
5.1. Electrical Power
VBAT = 3.3V ±10%, with a ripple of 25mV
RMS
(Sine wave 10 Hz to 5 MHz)
VIO = 1.8V ±5%, with a ripple of 25mV
RMS
(Sine wave 10 Hz to 5 MHz)
5.2. Environmental
5.2.1. Absolute Maximum Ratings
Stresses beyond those listed in Table 4 below may cause permanent damage to the
device. These are stress ratings only and the functional operation of the device at these
or any other conditions beyond those indicated under Table 5 - Normal Operating
Conditions” is not implied. Exposure to absolute-maximum-rated conditions for
extended periods may affect device reliability.
Rating
Condition
Min
Max
Unit
VBAT power supply voltage
Absolute Max Voltage up to 6 hours cumulative in
7 years.
-0.5
5.5
V
VIO power supply voltage
-0.5
2.1
V
Input voltage to Analog pins
FM_RF_IN_P, FM_AUD_IN_L, FM_AUD_IN_R
FM_AUD_OUT_L, FM_AUD_OUT_R
-0.5
2.1
V
Input voltage to all other pins
-0.5
VIO+0.5V
V
Operating ambient temperature
range
Absolute Minimum driven by TCXO
-30
85
°C
Storage temperature range
Absolute Max driven by TCXO
-40
85
°C
Table 4 - Absolute Maximum Ratings