User's Manual

Hardware Installation

2 Hardware Installation

An AP-7131 installation includes mounting the AP-7131 on a wall, ceiling T-bar or an above the ceiling

orientation, connecting the AP-7131 to the network (LAN or WAN port connection), connecting

antennas and applying power. Installation procedures vary for different environments.

An AP-7131 model access point has the following port designations:

• GE1/POE - LAN port

• GE2 - WAN Port

2.1 Precautions

Before installing the AP-7131 verify the following:

• Do not install in wet or dusty areas without additional protection. Contact a Motorola

representative for more information.

• Verify the environment has a continuous temperature range between -20° C to 50° C.

2.2 Package Contents

Check package contents for the correct model AP-7131 and applicable AP-7131 accessories. Each

available configuration (at a minimum), contains:

• AP-7131 model access point (accessories dependent on SKU ordered)

• AP-7131 Install Guide (this guide)

• Accessories Bag (4 rubber feet and a LED light pipe and badge with label for above the

ceiling installations)

Contact the Motorola Support Center to report missing or improperly functioning items.

NOTE The AP-7131 ships with a cover (facade) to protect the access point. The

cover disconnects from the access point as illustrated on the next page.

When attached, the AP-7131’s LEDs continue to illuminate through the

cover.