User's Manual

AP 7161 Access Point Installation Guide 19
The top housing LEDs have the following display patterns and functionality:
Two Radio LEDs
A two radio model access point (P/N AP-7161-66040-US and AP-7161-66040-WR) has the following unique LED
behavior:
LED 1
(Sensor)
LED 2
(2.4 GHz)
LED 3
(5 GHz)
LED 4
(GE2/WAN)
LED 5
(GE1/LAN)
LED 6
(System)
Not Used Blinking
Emerald
indicates
802.11b/g/n
activity.
Solid Emerald
indicates a radio
is present but
not configured.
Blinking Amber
indicates
802.11a/n
activity.
Solid Amber
indicates a radio
is present but
not configured.
LED Off
indicates the
port is not
connected.
Blinking Green
indicates
normal
operation.
Rapidly blinking
Yellow
indicates a port
error.
LED Off
indicates the
port is not
connected.
Blinking Green
indicates
normal
operation.
Rapidly blinking
Yellow
indicates a port
error.
Solid Red
indicates
diagnostic mode.
Blinking Red at 1
second interval
indicates POST
failure.
Solid White
following
diagnostic
mode indicates
booting.
Blinking Red and
White at 1
second interval
indicates “no
adoption”.
Solid White
indicates normal
operation.
WARNING! If LED 6 remains blinking Red for longer than 10 minutes, cycle the power to the
unit. If the condition persists, contact the Motorola Solutions support center.