User's Manual

22 AP-7522 Access Point
7. Select Save/Commit within each page to save the updates made to that page's configuration. Select
Next to proceed to the next page listed in the Navigation Panel without saving your updates.
For the purposes of this guide, use the Typical Setup (Recommended) option to simplify the process of
getting the Access Point up and running quickly with a minimum number of changes to the Access Point’s
default configuration.
For information on using the Access Point’s Advanced Setup option, refer to the WiNG Access Point
System Reference Guide to familiarize yourself with the feature set supported by the WiNG operating
system. The guide is available at
https://portal.motorolasolutions.com/Support/US-EN/Wireless+Networks
.
To configure the Access Point using the Typical Setup Wizard:
8. Select Typical Setup from the Choose One type to Setup the Access Point field on the Initial Setup
Wizard.
9. The Typical Setup Wizard displays the Access Point Settings screen to define the Access Point's
Standalone versus Virtual Controller AP functionality. This screen also enables selection of the country of
operation for the Access Point.
NOTE While you can navigate to any page in the navigation panel, you cannot
complete the Initial AP Setup Wizard until each task in the Navigation
Panel has a green checkmark.
NOTE The professional installer should refer to the Motorola Solutions WiNG
Access Point System Reference Guide available at
https://portal.motorolasolutions.com/Support/US-EN/Wireless+Networks
for detailed information on how to set the Access Point’s transmit power,
antenna gain and channel in respect to the delployment country’s unique
regulatory requirements.
MN000879A01B.fm Page 22 Thursday, July 10, 2014 11:01 AM