User's Manual

10 AP-7602 Wireless Wallplate
reducing the burden of installation and allowing optimal AP-7602 placement in respect to the
intended coverage area.
The Power Injector is a high power POE Injector delivering up to 30 watts. The AP-7602 can
only use a Power Injector when connecting the unit to the AP-7602’s GE1/POE port. The
Power Injector is separately ordered and not shipped with an existing AP SKU.
The Power Supply is not included with the AP-7602 and is orderable separately as an
accessory. Disconnecting AC power from the Wireless Wallplate causes the unit to re-boot
before sourcing power from a POE power injector. If the AP is operating using injector supplied
power, the AP will not automatically reboot if an AC adapter is connected. The AP-7602
continues to operate with power supplied from the AC adapter without change to the operating
configuration. If using AC adapter supplied power and a change to the AP’s operating
configuration is warranted, the AP-7602 needs to be manually rebooted by the customer.
CAUTION Using a non-compliant injector, or an injector supporting
legacy modes will not allow the AP-7602 to function at
optimum performance levels.
CAUTION The AP-7602 supports any standards-based compliant
power source. However, using the wrong solution
(including a POE system used on a legacy device) could
either limit functionality or severely damage the AP-7602
and void the product warranty.
!
!