User's Manual

16 AP-7602 Wireless Wallplate
2. Gently push RJ-45 outlets into telco box.
3. Reuse the existing screws to screw the mounting plate to the telco box.
4. Connect one end of the 10cm RJ-45 cable into GE1.
5. Route the GE1 cable back through the routing channel on the underside of the
Wireless Wallplate.
6. Plug the other end of the 10cm RJ-45 cable into the RJ-45 outlet.
7. Snap the Wireless Wallplate to the mounting plate.
8. Verify the unit has power by observing the LEDs. For more information on AP-7602
LED behavior, see LED Indicators on page 17.
9. The AP-7602 is ready to configure.