User's Manual

Installation Guide 19
3 Basic Configuration
Once the AP-7602 is installed and powered on, complete the following WiNG Assist
configuration steps to get the AP-7602 up and running with minimal administrative
intervention.
Startup Assist updates existing settings. To delete or revise existing Startup Assist settings,
either rerun Startup Assist or navigate to where those parameters appear in the user interface
and update them accordingly. Refer to the more advanced configuration documentation
available on the Zebra support site for updating the management interface beyond the scope
of the WiNG Assist configuration described in this guide. For more information, see
www.zebra.com/support
.
1. Power the AP-7602 using an appropriate power adapter, PoE injector, or PoE
switch.
2. Connect to the AP-7602. The default IP address is located on the backside of the
AP-7602.
3. Enter the default username admin in the Username field.
4. Enter the default password admin123 in the Password field.
5. Select the Login button to load the management interface.
If logging in using a factory default configuration, Startup Assist automatically
displays.