User's Manual

20 AP-7602 Wireless Wallplate

If Startup Assist does not automatically display, it can be invoked at any time from

the upper-left of the Basic Configuration screen.

6. Set the following Startup Assist parameters:

• Virtual Controller - Select this option to set this AP-7602 as a Virtual Controller

capable of managing and provisioning up to 64 AP-7602 models. Those AP-7602

NOTE Startup Assist automatically sets the radio transmit power and

enables Auto Channel selection. The AP-7602's name is

automatically assigned based on the device type and the last

three octets of the device's hardcoded MAC address. WLAN 1

and WLAN 2 both use VLAN ID 2200 by default. To adjust any of

these parameters, edit the appropriate configuration screen

directly. Refer to the reference material available on Zebra

Support for configuring the AP-7602 beyond the scope of the

minimal WiNG Assist configuration described in this guide. For

more information, go to