User's Manual

Installation Guide 7
1 Introduction
The AP-8533 external antenna and internal antenna Access Point's are
high-tier Access Point's for dependable and efficient network performance.
The AP-8533 is a 4x4:4 MU-MIMO 802.11ac Access Point utilizing one 5GHz
802.11ac radio, one 2.4GHz 802.11n radio and a tri-band 2.4GHz/5GHz
802.11ac radio for sensor functionality.
The Access Point’s unique WiNG 5 software enables the Access Point to
function as either a Standalone Access Point, an Adaptive Access Point, or a
Virtual Controller.
If new to Access Point technology, refer to the WiNG Access Point System
Reference Guide to familiarize yourself with Access Point technology and the
feature set supported by the WiNG operating system. The guide is available at
www.zebra.com/support
.
This document is written for the qualified network device installer.
1.1 Document Conventions
The following graphical alerts are used in this document to indicate notable
situations:
1.2 Warnings
• Read all installation instructions and site survey reports, and verify
correct equipment installation before connecting the AP-8533 Access
Point.
• Remove jewelry and watches before installing this equipment.
• Verify any device connected to this unit is properly wired and
grounded.
• Verify there is adequate ventilation around the device, and that
ambient temperatures meet equipment operation specifications.
Note • Tips, hints, or special requirements that you should take note of.
Caution • Care is required. Disregarding a caution can result in data loss or
equipment malfunction.