User's Manual

Installation Guide 9
1.5 AP-8533 Antennas
1.5.1 Dual Band 2.4 GHz / 5 GHz WIFI Antennas - US/Taiwan
An AP-8533 external antenna Access Point supports the following antenna
options:
Note • Per FCC requirement, the use of the Access Point on UNII-1 of 5GHz
band requires installers to input antenna elevation gain during configuration if
the AP placement is outdoors. This information can be found in Zebra
antenna guide located at
www.zebra.com/support.
Part Number
Antenna
Type
2.4
GHZ
Gain
(dBi)
5
GHZ
Gain
(dBi)
Elevation
Gain
Impedance
(Ohms)
ML-2452-HPAG4A6-01 Dipole 4 7.3 5.7 50
ML-2452-APAG2A1-01 Dipole 2.7 1.7 N/A 50
ML-2452-HPA6-01 Dipole 5.3 6.1 4.09 50
ML-2452-APA2-01 Dipole 3.17 4.85 N/A 50
ML-2452-PNA5-01R Panel 5.5 6 5.2 50
ML-2452-SEC5M4-N36 Polarized
Panel
6.92 7.23 3.95 50
ML-2452-PTA4M4-036 Patch 5 6.6 N/A 50
ML-2499-HPA6H-01 Polarized
Dipole
5.4 N/A N/A 50
ML-5299-HPA5H-01 Polarized
Dipole
N/A 5 -1.21 50