owners manual printer EPL2

Media Detection Media detection in EPL2 printers is a combina
-
tionofprogrammingandprintermediasensing.
TheQ (Set FormLength) andO (Option) com
-
mands program the media detection method.
The user must configure the printer for the me
-
dia type and the (programmed) form or label in
use.
Theprintercandetectthe beginning andendof
the printable area on the media by one of three
methods: Gap, Notch (hole), or Black line. The
Gap method detects the difference in optical
density of a label on a liner from the liner only
with the Transmissive (Gap) sensor. The Notch
methodusestheTransmissivesensortodetecta
hole in the media (gap-less labels or tag stock).
The Black line method uses the Reflective sen
-
sor to detect a preprinted black line on the me-
dia back (for gap-less labels or tag stock).
Printing on continuous media requires pro-
gramming to control media positioning.
EPL2 printers also support a “Label Dispense”
modeasaprinterconfigurationoption(formost
models). The printers use a “Label Taken” sen-
sor to detect the removal of a label.
One or more of these sensors may require user
adjustment or configuration for proper opera-
tion. All EPL2 printers have an AutoSense fea
-
ture to optimize label and label gap detection by
the transmissive (gap) sensor. See the printer’s
user’s manual for printer specific sensor adjust
-
ment control.
2-4 980352-001 Rev.A