owners manual printer EPL2

A Command - ASCII Text
The backslash (\) character designates the fol
-
lowing character is a literal and will encode into
thedatafield.Refertothefollowingexamples:
To Print
Enter into data field
“ \”
“Company” \”Company\”
\ \\
\code\ \\code\\
Examples:
¿
N¿
A50,0,0,1,1,1,N,"Example 1"¿
A50,50,0,2,1,1,N,"Example 2"¿
A50,100,0,3,1,1,N,"Example 3"¿
A50,150,0,4,1,1,N,"Example 4"¿
A50,200,0,5,1,1,N,"EXAMPLE 5"¿
A50,300,0,3,2,2,R,"Example 6"¿
P1¿
Will Produce:
As shown in example 5 above, font 5 only supports
upper case characters. Refer to Appendix A for a
complete listing of available fonts and character sets
supported.
Use the LE command to create reverse print text in
-
stead of the “R”intheA command parameter p
7
.
This is the recommend method because it provides
the best size, position and centering of the black line
(rectangle) bordering the reversed text.
980352-001 Rev.A 3-5
HINT