owners manual printer EPL2

b Command - 2D Bar Code - PDF417 Specific Options
p
9
(f) = Bar code origin point
Values: 0 or 1, Default is 1
f1- Center of bar code as defined by the
automatically adjusted
symbol size, i.e.
width and height. Parameters p
4
and
p
5
values are maximum values only.
f0- Upper left corner of bar code.
p
10
(x) - module width (in dots)
Values: 2 - 9 (i.e. x2-x9)
Default: Auto selects 6 (dots). Tests data
with maximum size limit set by p
4
and
p
5
and then the other optional parame
-
ters. The printer automatically reduces
the module width in one dot increments
until the data fits within the symbols
maximum dimensions (and other ap-
plied parameters) or until 3 dots has
failed, then reports an error.
p
11
(y) - set bar height (in dots)
Range: 4 - 99 (i.e. y4-y99)
Default: 4 times module width (p
10
)
p
12
(r) - maximum row count
Maximum limit for the number of rows to
be used for auto selecting symbol features.
p
13
(l) - maximum column count
Maximum limit for the number of col
-
umns to be used for auto selecting sym
-
bol features.
p
14
(t) - truncated flag - legal values are:
0 = not truncated, 1= truncated
See the PDF 417 specification for details.
p
15
(o) - rotation
Values: 0= 0º, 1= 90º, 2= 180º, 3= 270º
Settings of 90° & 270° will cause the sym
-
bols maximum height (p
4
) and width (p
5
)
values to transpose when automatically cal
-
culating and generating the symbol, i.e. the
height would affect column dimensions
and width would affect row dimensions.
3-22 980352-001 Rev.A