User's Manual

3 - 4 ES400 User Guide
1. Tap Start > Phone or press the green key.
2. From the Phone keypad, tap and hold the speed dial location number assigned to a contact. (To dial a one-digit
speed dial location number, tap and hold the speed dial number. To dial a two-digit speed dial location number,
tap the first digit and then tap and hold the second digit.)
or
From the Phone keypad, tap Speed Dial and tap the speed dial location number of the desired contact in the
list.
Figure 3-3 Speed Dial Contact List
3. To stop dialing or end the call, tap End or press the red key.
Dialing Options
TBS
Answering a Call
A dialog box appears on the ES400 when it receives an incoming call. If the phone is set to ring, a ring tone
sounds. Answer or ignore the incoming call.
To answer an incoming call tap Answer on the dialog box or press the green key.
Figure 3-4 Incoming Call
To ignore the incoming call, tap Send to voicemail. This sends the caller to voice mail, depending on the service
provider. Otherwise, this presents Busy to the calling party.
To end the call tap End or press the red key.
Speed Dial
Location Number