User's Manual

Introduction

This guide covers the following configurations:

• ET1N0 (WLAN only)

• ET1N2 (WLAN and WAN)

• ET1N0 and ET1N2 with scan modules.

Getting Started

To get started:

• Install SIM card (ETN2 with GSM)

• Install the battery

• Charge the battery

• Start the ET1

• Activate the ET1 on a CDMA network.

Install the SIM Card

The ET1N2 requires an activated SIM card. Obtain the card from

a service provider.

1. Lift access door.

2. Insert SIM card into SIM holder with contacts facing down and

cut edge facing away from the holder.

3. Close access door.

SIM Card

PRELIMINARY