User's Manual

Quick Reference Guide
NOTE The Charge Only Cradle (CRD-ET5X-1SCG1) and the Communication and Charge
Cradle (CRD-ET5X-1SCOM1) come with two inserts; tall insert and short insert. Install the
tall insert when using an ET5X without a Rugged Frame and Expansion Back. Install the
small insert when using an ET5X with an Expansion Back and without a Rugged Frame. Do
not install either insert when using the ET5X with the Rugged Frame.
The Rugged Communication and Charge Cradle (CRD-ET5X-1SCOM1R) does not come
with inserts. Use with ET5X and Rugged Frame with IO Adapter.
Short Insert Tall Insert
Charge Only Cradle Communication Cradle Rugged Communication Cradle
Setup the Charge Only Cradle or Communication Cradle, power supply, PWRS-14000-148R and
3-
wire country specific AC Line Cord, sold separately.
1. If using the Communication and Charging Cradle, open the bottom access door and hold it to the
back of the tablet.
2. Align the ET5X with the alignment pins on the cradle.
3. Insert the ET5X into the cradle. Note that the Communication Cradle contains a locking mechanism
that locks the ET5X to the cradle.