User Guide

Connecting Wi-Fi and Bluetooth Dongles D - 3
4. Once the APs are scanned, enter the appropriate passkey and enable Connect Automatically (if required to
connect to the AP automatically if the connection is lost).
Figure D-4 Entering Connect Information
5. Select Connect. When the connection to the AP succeeds, an IP is assigned and appears in the
IP Address field.
Figure D-5 Assigned IP Address
The reader is now accessible using the wireless IP shown in the IP Address field (157.235.207.24 in this case).
The WiFi interface supports dynamic addressing mechanisms for both IPV4 and IPv6. There is no provision to
set a static IP address.
For wireless IP address details, select
Communication > Wi-Fi tab.
Draft 2