User Guide
Table Of Contents
- Warranty
- Revision History
- About This Guide
- Quick Start
- Getting Started
- Installation and Communication
- Administrator Console
- Introduction
- Connecting to the Reader
- Administrator Console Login
- Reader Administrator Console
- Status
- Reader Statistics
- Configure Reader
- Read Tags
- Communication Settings
- System Time Management
- IPV6 IP Sec
- Change Password
- GPIO
- Applications
- Reader Profiles
- Firmware Version/Update
- Commit/Discard
- System Log
- Reader Diagnostics
- Shutdown
- Wi-Fi Configuration
- Application Development
- Firmware Upgrade
- Troubleshooting
- Technical Specifications
- Static IP Configuration
- RF Air Link Configuration
- Connecting Wi-Fi and Bluetooth Dongles
- Copying Files To and From the Reader
- Data Protection
iii
Revision History
Changes to the original manual are listed below:
Change Date Description
-01 Rev A 1/2014 Initial release
-02 Rev 2/2015 Zebra Re-Branding
-03 Rev 4/2016 Updates for SNAP; updated screen shots.
-04 Rev 7/2016 Updates:
- Changed the installing antenna separation distance to 13.4 in (34 cm).
- Changed max antenna gain exceed to + 6.6dBiL.
- Changed
Max Conducted RF Power at Antenna Input for US in table 3-1.
- Changed
Max Antenna Gain Allowed for US in table 3-1.
Draft 2