User Guide

4 - 12 FX7500 RFID Reader Integrator Guide
• KillCount - Displays the number of successful (and failed) kill operations on tags.
• Reset Statistics - Resets all success and failure counts (including the optional Gen2 and Custom
statistics) for all read points.
• Refresh Interval - Sets the refresh interval (in seconds) for this window. The statistics information for the
chosen read point is refreshed every
N seconds (where N is the set refresh interval). The minimum value
is 10 seconds and the maximum value allowed is 86,400 seconds. Input a new value and click
Change to
set a new interval.
Reader Gen2 Optional Operation Statistics
Select Gen2 Optional to view the Reader Gen2 Operation Statistics window. This window provides options to
view the statistics of read points for the optional Gen2 operations the reader supports.
Figure 4-9 Reader Gen2 Operation Statistics Window
• Choose ReadPoint - Select a specific read point from the drop-down list to display the statistics, or select
All to view the combined statistics for all read points.
• BlockErase - Displays the number of successful (and failed) block erase operations.
• BlockWrite - Displays the number of successful (and failed) block write operations.
• BlockPermalock - Displays the number of successful (and failed) block permalock operations.
• Reset Statistics - Resets all success and failure counts (including the standard Gen2 and custom
statistics) for all read points.
• Refresh Interval - Sets the refresh interval (in seconds) for this window. The statistics information for the
chosen read point is refreshed every
N seconds (where N is the set refresh interval). The minimum value
is 10 seconds and the maximum value allowed is 86,400 seconds. Input a new value and click
Change to
set a new interval.
Draft 2