Manualshelf

User's Manual

ManualsBrandsZebra Technologies ManualsComputers & AccessoriesWireless Router and Intelligent Access Point
21222324252627282930
Setup and Deployment
3
Record MAC Address of the IAP
The transceiver MAC address is recorded on a label located on the antenna side of the IAP as
shown in Figure 5. Record this number in Section 4 - MAC Address Tables
, because it will be
required later to configure and test the device.
Figure 5 IAP6300 Identification Label
IAP Assembly
The Figure 6 shows the external connection points on an IAP6300 box.
Figure 6. IAP6300 Connection Points
Antenna Connector
Power Out (3-pin)Power In (4-pin)
Test Port
(Not Shown)
RJ45 (Data) Port