User's Manual

Setup and Deployment

Wireless Router (WR)

The MWR6300 (Wireless Router) is an infrastructure device positioned in a fixed location, such

as on a pole, wall, or rooftop. The MWR6300 requires professional installation to ensure the

installation is performed in accordance with FCC licensing regulations.

The Wireless Routers provides range extension, a means to route around obstructions, and a

fixed location reference for use in Geo-Location (an optional feature).

The

MWR6300s comes with a mounting bracket that can be attached to a pole with a

diameter of 1-3.5 inches . For a

deployment, a permanent AC power source for each WR

must be provided.

Equipment

The following list defines the hardware components needed to setup a WR:

• WR Box with N-type Antenna Connector

• 120V A/C Power Cable with a NEMA 5-15 plug

• Antenna with N-type Male Antenna Connector

• Mounting Bracket

The Network Operator must supply the following:

• Mounting Location

• 120V A/C Power Source

• Hand tools for bracket installation

Optional Configurations:

• Power Cable to connect to a Fisher-Pierce 7570B photoelectric cell

Approved Antennas Options:

Manufacturer

Part Number

Gain Type

Maxrad Z1578 8 dBi Onmi

Maxrad Z1576 4 dBi Onmi

Hyperlink HG2409MU 8 dBi Onmi

Hyperlink HG2407U 7.5 dBi Onmi

Refer to the WR data sheet for a complete list of options.