User's Manual

MeshNetworks
10
Testing
Verify the operation of the MWR6300 using the following procedure:
1. Apply power to the MWR6300.
2. Obtain the transceiver MAC address that was recorded in Section 4 - MAC Address
Tables. The address will be in the format 00-05-12-0A-xx-yy.
3. From MeshManager, display devices using the MAC address.
4. Select the appropriate WR in the device tree, and then ping the device (right click and
select ping).
A response to the ping command verifies that the transceiver is communicating.