User's Manual

Setup and Deployment
17
Reset the Device
The Device Management options are detailed below.
Home Tab – Change Admin Password
From the Home tab, the user can select the “Change Admin Password” to change the
administrator password of the device.
WARNING – If the password is lost, the password can only be reset at the factory. Do not
forget to record the information in an appropriate location for future use.
1. To change the password, select “Change Admin Password”.
2. “Enter the new password” will be displayed on the Change Password window as shown
in Figure 16. Enter the new password in the “New Password” textbox.
3. Enter the new password again
in the “New Password (again)” textbox.
Figure 16. MEA Device Administration Enter New Password Window
4. Click on the “Submit” button. The browser will display a message that confirms the
password change as shown in Figure 17.
Figure 17. MEA Device Administration Password Changed Window
Home Tab – Update Device Firmware
From the Home Tab, select “Update Device Firmware” to load a new version of the firmware
into the IAP.
. A New Device Firmware window will be displayed as shown in Figure 18