User's Manual

ManualsBrandsZebra Technologies ManualsComputers & AccessoriesWireless Router and Intelligent Access Point

Setup and Deployment

Section 1 - Overview

Introduction

The wireless broadband system allows a network operator to deploy a wireless, multi-

hopping ad hoc network. This document describes how to setup, configure, and deploy a

system to operate in infrastructure mode. Infrastructure mode allows the user’s to have access

to a wired network. For a deployment that does not need access to a wired network, refer to the

“

Setup and Deployment for Peer-to-Peer Mode” document.

The

system is designed for easy installation. The infrastructure components of a

system are preinstalled with a default configuration for connection to a wired network. Any

configuration items described in this document are for site-specific information.

MeshNetworks recommends that the Network Operator receive setup and deployment training

at MeshNetworks’ facility prior to deploying the

network. MeshNetworks may optionally

provide the Network Operator assistance with site surveys and deployment.

Note: The

MWR6300 Wireless Routers and IAP6300 Intelligent Access Points require

“professional installation” to ensure the installation is performed in accordance with FCC

licensing regulations.

Documentation Overview

The Setup and Deployment User’s Guide is arranged in the following sections:

Section 1 - Overview

provides an overview of the Starter Kit and the organization of the

User’s Guide.

Section 2 – Description of the

System provides a general overview of a complete

Network.

Section 3 - Starter Kit Setup and Deployment

provides installation and configuration

information for the Subscriber Device, Wireless Router, Intelligent Access Point, and the MiSC.

Section 4 - MAC Address Tables

provides three convenient tables to record network

configuration data.

Section 5 – Site Selection Guidelines

provides deployment and installation suggestions.

Section 6 - The Customer Service Information

section provides contact information if you

need assistance with your

Starter Kit.

Section 7 - License and Warranty Information

contains MeshNetworks’ License Agreement

and Warranty for the

products.

Section 8 - FCC Regulatory Information

provides important warnings and safety information.

Acronyms

HAS Hardware Authentication Server

IAP Intelligent Access Point

Mesh Enabled Architecture