User's Manual

Motorola reserves the right to make changes to any product to improve reliability, function, or
design. Motorola does not assume any product liability arising out of, or in connection with, the
application or use of any product, circuit, or application described herein. No license is granted,
either expressly or by implication, estoppel, or otherwise under any patent right or patent, covering
or relating to any combination, system, apparatus, machine, material, method, or process in
which Motorola products might be used. An implied license exists only for equipment, circuits, and
subsystems contained in Motorola products.
Warranty
For the complete Motorola hardware product warranty statement, go to: http://www.motorola.com/
enterprisemobility/warranty.
Service Information
If you have a problem using the equipment, contact your facility’s Technical or Systems Support. If
there is a problem with the equipment, they will contact the Motorola Enterprise Mobility Support
at: http://www.motorola.com/enterprisemobility/contactsupport.
For the latest version of this guide go to: http://motorola.com/enterprisemobility/manuals.
Motorola, Inc.
One Motorola Plaza
Holtsville, New York 11742, USA
1-800-927-9626
http://www.motorola.com/enterprisemobility
MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in
the U.S. Patent and Trademark Office. All other product or service names are the property
of their respective owners.
© Motorola, Inc. 2010
72-134232-01 Revision 1 — May 2010
MC65
Regulatory Guide
Regulatory Information
This guide applies to the following Model: MC659B.
All Motorola devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required.
Any changes or modifications to Motorola equipment, not expressly approved by Motorola, could void
the user's authority to operate the equipment.
Declared maximum operating temperature: 50°C.
This guide is available in local languages, translations can be downloaded from the following
website:http://www.motorola.com/enterprisemobility/support/.
UL Listed Products with GPS
Underwriters Laboratories Inc. (UL) has not tested the performance or reliability of the Global
Positioning System (GPS) hardware, operating software or other aspects of this product. UL has only
tested for fire, shock or casualties as outlined in UL’s Standard(s) for Safety for Information Technology
Equipment, UL60950-1. UL Certification does not cover the performance or reliability of the GPS
hardware and GPS operating software. UL MAKES NO REPRESENTATIONS, WARRANTIES OR
ERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY
GPS RELATED FUNCTIONS OF THIS PRODUCT.
Bluetooth
®
Wireless Technology
This is an approved Bluetooth product. For more information or to view the End Product Listing, please
visit http://www.bluetooth.org/tpg/listings.cfm.
Wireless Devices Country Approvals
Regulatory markings, subject to certification, are applied to the device signifying the radio(s) are
approved for use in the following countries: United States, Canada, Japan, Australia, and Europe
1
.
Please refer to the Motorola Declaration of Conformity (DoC) for details of other country markings.
This is available at http://www.motorola.com/doc.
Note 1: Europe includes Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
Country Roaming
This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the
product operates on the correct channels for the particular country of use.
Ad-Hoc Operation
Ad-Hoc operation is limited to Channels 36-48 (5150-5250 MHz). Use of this band is restricted to
Indoor Use Only, any other use will make the operation of this device illegal.
Frequency of Operation – FCC and IC
5 GHz Only
The use in the UNII (Unlicensed National Information Infrastructure) band 1 (5150-5250 MHz) is
restricted to Indoor Use Only; any other use will make the operation of this device illegal.
Health and Safety Recommendations
Ergonomic Recommendations
• Reduce or eliminate repetitive motion
• Maintain a neutral postures
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures
• Alternate hands whenever possible when performing a repetitive task.
Vehicle Installation
RF signals may affect improperly installed or inadequately shielded electronic systems in motor
vehicles (including safety systems). Check with the manufacturer or its representative regarding your
vehicle. You should also consult the manufacturer of any equipment that has been added to your
vehicle.
An air bag inflates with great force. DO NOT place objects, including either installed or portable
wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless
equipment is improperly installed and the air bag inflates, serious injury could result.
Position your device within easy reach. Be able to access your device without removing your eyes
from the road.
Note: Connection to an alert device that will cause a vehicle horn to sound or lights to flash, on receipt
of a call on public roads, is not permitted.
Safety on the Road
Do not take notes or use the device while driving. Jotting down a “to do” list or flipping through your
address book takes attention away from your primary responsibility, driving safely.
When driving a car, driving is your first responsibility - Give full attention to driving. Check the laws and
regulations on the use of wireless devices in the areas where you drive. Always obey them.
When using a wireless device behind the wheel of a car, practice good common sense and remember
the following tips:
1. Get to know your wireless device and any features such as speed dial and redial. If available, these
features help you to place your call without taking your attention off the road.
2. When available, use a hands free device.
3. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be
hazardous.
4. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while
moving, dial only a few numbers, check the road and your mirrors, then continue.
5. Do not engage in stressful or emotional conversations that may be distracting. Make people you
are talking with aware you are driving and suspend conversations that have the potential to divert
your attention from the road.
6. Use your wireless phone to call for help. Dial the Emergency services, (9-1-1 in the US, and 1-1-2
in Europe) or other local emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone! The call can be made regardless
of any security codes and depending on a network, with or without a SIM card inserted.
7. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in
progress or other serious emergency where lives are in danger, call the Emergency Services, (9-1-
1 in the US, and 1-1-2 in Europe) or other local emergency number, as you would want others to do
for you.
8. Call roadside assistance or a special non-emergency wireless assistance number when necessary.
If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic
accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance
or other special non-emergency wireless number.
“The wireless industry reminds you to use your device / phone safely when driving.”
Please observe all warning notices with regard to the usage of wireless devices.
Potentially Hazardous Atmospheres
You are reminded of the need to observe restrictions on the use of radio devices in fuel depots,
chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or
metal powders) and any other area where you would normally be advised to turn off your vehicle
engine.
Safety in Aircraft
Switch off your wireless device whenever you are instructed to do so by airport or airline staff. If your
device offers a 'flight mode' or similar feature, consult airline staff as to its use in flight.
Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or
healthcare facilities. These requests are designed to prevent possible interference with sensitive
medical equipment.
Pacemakers
Pacemaker manufacturers recommended that a minimum of 15 cm (6 inches) be maintained between
a handheld wireless device and a pacemaker to avoid potential interference with the pacemaker.
These recommendations are consistent with independent research and recommendations by Wireless
Technology Research.
Persons with pacemakers:
• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned
ON.
• Should not carry the device in a breast pocket.
• Should use the ear furthest from the pacemaker to minimize the potential for interference.
• If you have any reason to suspect that interference is taking place, turn OFF your device.
Other Medical Devices
Please consult your physician or the manufacturer of the medical device, to determine if the operation
of your wireless product may interfere with the medical device.
Safety Information
Reducing RF Exposure - Use Properly
Only operate the device in accordance with the instructions supplied.
International
The device complies with internationally recognized standards covering human exposure to
electromagnetic fields from radio devices. For information on “International” human exposure to
eletromagnic fields refer to the Motorola Declaration of Conformity (DoC) at http://www.motorola.com/
doc.
Europe
Handheld Devices
This device was tested for typical body-worn operation. Use only Motorola tested and approved belt-
clips, holsters, and similar accessories to ensure EU Compliance. For information on “International”
human exposure to eletromagnic fields refer to the Motorola Declaration of Conformity (DoC) at http://
www.motorola.com/doc.
US and Canada
Phones (placed to ear or used with headset)
For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines
when used with a Motorola accessory designated for this product or when used with an accessory that
contains no metal and that positions the handset a minimum of 1.5cm from the body. The use of third-
party belt-clips, holsters, and similar accessories may not comply with FCC RF exposure compliance
requirements, and should be avoided. The FCC has granted an Equipment Authorization for these
model phones with all reported SAR levels evaluated as in compliance with the FCC RF emission
guidelines. SAR information on these model phones is on file with the FCC and can be found under the
Display Grant section of http://www.fcc.gov/oet/ea/fccid.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must
not be co-located or operating in conjunction with any other transmitter/antenna except those already
approved in this filing.
Laser Devices
Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No.
50, dated June 24, 2007 and IEC 60825-1 (Ed. 2.0), EN60825-1: 2007. The laser classification is
marked on one of the labels on the device.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such
as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2
laser is not known to be harmful.
Scanner Labeling
Camera Flash
LED LIGHT
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LED PRODUCT
Power Supply
Use only a Motorola/Symbol approved power supply output rated 5.4 VDC and minimum 3A. The
power supply shall be Listed to UL/CSA 60950-1; and certified to IEC60950-1 and EN60950-1 with
SELV outputs. Use of alternative power supply will invalidate any approval given to this device and
may be dangerous.
Batteries
Taiwan - Recycling
EPA (Environmental Protection Administration) requires dry battery producing or
importing firms in accordance with Article 15 of the Waste Disposal Act are
required to indicate the recycling marks on the batteries used in sales, giveaway
or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.
Battery Information
Motorola rechargeable battery packs are designed and constructed to the highest standards within the
industry.
However, there are limitations to how long a battery can operate or be stored before needing
replacement. Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh
environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality
may occur. Store batteries at half of full charge in a dry, cool place, removed from the equipment to
prevent loss of capacity, rusting of metallic parts and electrolyte leakage. When storing batteries for
one year or longer, the charge level should be verified at least once a year and charged to half of full
charge.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Motorola batteries is one year, regardless if the battery was purchased
separately or included as part of the mobile computer. For more information on Motorola batteries,
please visit: http:/mysymbolcare.symbol.com/battery/batbasics1.html
Battery Safety Guidelines
• The area in which the units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non commercial
environment.
• Follow battery usage, storage, and charging guidelines found in the user's guide.
• Improper battery use may result in a fire, explosion, or other hazard.
• To charge the mobile device battery, the battery and charger temperatures must be between +32ºF
and +104ºF (0ºC and +40ºC)
• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may
present a risk of fire, explosion, leakage, or other hazard. If you have any questions about the
compatibility of a battery or a charger, contact Motorola Enterprise Mobility support.
• To enable authentication of an approved battery, as required by IEEE1725 clause 10.2.1, all
batteries will carry a Motorola hologram. Do not fit any battery without checking it has the Motorola
authentication hologram.
• For devices that utilize a USB port as a charging source, the device shall only be connected to
products that bear the USB-IF logo or have completed the USB-IF compliance program.
• Do not disassemble or open, crush, bend or deform, puncture, or shred.
• Severe impact from dropping any battery-operated device on a hard surface could cause the
battery to overheat.
• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or
expose to water or other liquids, or expose to fire, explosion, or other hazard.
• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked
vehicle or near a radiator or other heat source. Do not place battery into a microwave oven or dryer.
• Battery usage by children should be supervised.
• Please follow local regulations to promptly dispose of used re-chargeable batteries.
• Do not dispose of batteries in fire.
• Seek medical advice immediately if a battery has been swallowed.
• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If
contact has been made, wash the affected area with large amounts of water and seek medical
advice.
• If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to
arrange for inspection.
Use with Hearing Aids
When some wireless devices are used near some hearing devices (hearing aids and cochlear
implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more
immune than others to this interference noise, and wireless devices also vary in the amount of
interference they generate. In the event of interference you may want to consult your hearing aid
supplier to discuss solutions.
The wireless telephone industry has developed ratings for some of their mobile phones, to assist
hearing device users in finding phones that may be compatible with their hearing devices. Not all
phones have been rated. Motorola terminals that are rated have the rating included on the Declaration
of Conformity (DoC) at http://www.motorola.com/doc.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing
loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a
rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it
for your personal needs.
CAUTION Only use Motorola approved and UL Listed accessories, battery packs and battery
chargers.
Do NOT attempt to charge damp/wet mobile computers or batteries. All components
must be dry before connecting to an external power source.
CAUTION In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to ensure
that you are adhering to your company’s safety programs to prevent employee
injury.
Warnings for Use of Wireless Devices
Safety in Hospitals
RF Exposure Guidelines
CAUTION Risk of explosion if battery is replaced by an incorrect type.
Dispose of batteries according to instructions.
Preliminary