Manualshelf

Installation Guide

ManualsBrandsZebra Technologies ManualsComputers & AccessoriesMesh AP-7181 Outdoor Wireless Access Point
11121314151617181920
Hardware Installation
9
If the units will be plugged directly into an electircal wall outlet, power plug adapters are
available for North America, Europe, and Australia.
2.10 Mounting an AP 7181
The AP 7181 is designed for outdoor installations. All hardware installations should be
performed by a professional installer.
Devices can be deployed using either the Bottom Mount Installation or the Top Mount
Installation procedure.
Mounting options are available for light pole, building roof tops, and building walls.
Choose one of the following mounting options based on the physical environment coverage
area requirements.
CAUTION Never plug a power cable wired to a power source for an AC
unit into a DC unit.
CAUTION Do not use the connector on the power cables for
interrupting current. Never actively plug or unplug the
connector while the cable is energized.
!
!