Installation Guide

Hardware Installation
17
3. Open the plastic bag covering the unit.
4. Roll the plastic bag to the bottom of the shipping carton and using the Yoke or
Antenna Ring, carefully remove the unit from the box . Using this method will help
prevent damage to the antenna assembly.
2.11.5 Staging the Device Prior to Installation
1. Place on solid surface with the Yoke facing up.
2. Using the 6mm Allen Wrench, loosen the Allen head bolts to remove the Yoke.
WARNING! An AP 7181 weighs 39 pounds. Use all appropriate cautions
when lifting and consider a two man lift when necessary.
CAUTION Never lift an AP 7181 using the Radome antenna panels or
other plastic parts. Always lift the unit by the Yoke or metal
Antenna rings.
!