Manualshelf

Installation Guide

ManualsBrandsZebra Technologies ManualsComputers & AccessoriesMesh AP-7181 Outdoor Wireless Access Point
21222324252627282930
AP 7181 Access Point: Installation Guide
22
7. Repeat the process if a second cable gland is required.
8. Attach an Ethernet cable to Gigabit Ethernet port GE2 (to be used with an external
laptop for configuring the unit). You will also need to terminate the flying lead
power cable with the proper plug (for the country of operation) so the unit can be
powered for configuration. After preparing the power cable attach the cable to the
power port. Notice that the power connector is keyed. Next configure the unit.
Refer to Getting Started for initial device configuration.