User's Manual

84 Zebra ZXP Series 8 Card Printer User’s Manual P1011091-001 Rev. A
Technical Specifications
Specifications
Electrical
• Auto-switching Single-phase AC power
• 90V~264V AC RMS and 47-63 HZ (50-60 Hz nominal)
• Power consumption:
Idle 100 W
Printing 150 W
Initializing / Warm-up 300 W
Sleep 20 W
Physical
• Height (printer only) 11.9" (303 mm)
• Height (with card feeder) 13.2" (334 mm)
• Width 14" (356 mm)
• Width (with card feeder) 14.9” (379 mm)
• Depth 20.4" (519 mm)
• Weight (printer only) 27.5 lbs (12.5 kg)
Environmental
• Operating Temperature 59º to 77ºF (15º to 25ºC)
• Storage Temperature 23º to 131ºF (-5º to 55ºC)
• Operating Humidity 20% to 80% non-condensing
• Storage Humidity 10% to 90% non-condensing
• Shipping Temperature -40º to 140ºF (-40º to 60ºC)
• Shipping Humidity 10 to 90% non-condensing
The device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received including interference that may cause undesired operation.
IC Caution Statement Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may
cause undesired operation of the device.