User's Manual

Quick Reference Guide 15
Customize the Imager Behavior
The Imager behavior can be configured by scanning custom barcode tables. The
following table provides examples of configurable Imager features.
Feature Description Default Setting
Beep on
reconnection
attempt
When this parameter is enabled, the
Imager emits a low/high beep when
Bluetooth link is reconnected.
The beep on
reconnection
attempt feature is
disabled by default.
Motion
sensing
When this parameter is enabled, the
Imager automatically scans when motion
stops in front of the Imager and a barcode
is placed within the depth of field of the
Imager.
Motion sensing is
set by default to on
for triggerless
models and off for
triggered models.
Proximity
sensing
When this parameter is enabled, the
Imager automatically scans when sensing
proximity to an object and a barcode is
placed within the depth of field of the
Imager.
Proximity sensing is
set by default to on
for trigger less
models and off for
triggered models.
Proximity
distance
When using proximity sensing, you can set
proximity distance to Short, Mid or Long.
Proximity distance
is set to Long by
default.
Low battery
indication
When this parameter is enabled, the
Imager flashes red every 15 seconds when
battery power is low.
Low battery
indication is
disabled by default.
Bluetooth
auto connect
The Imager automatically tries to reconnect
to a remote device when a disconnection
occurs that is due to the radio losing
communication. This can happen if the
Imager goes out of the mobile computer
range.
The following auto connect options are
available: “None”, “On power up”, “Back in
Bluetooth range”, “On power up & back in
Bluetooth range”.
Bluetooth auto
connect is set to
“Back in Bluetooth
range” by default.
QRG_507.fm Page 15 Wednesday, January 28, 2009 8:37 PM