User's Manual

4 - 6 MPact Location & Analytics Hardware Installation Guide
There is one styles of bracket mount included with the Indoor Style Beacon: Part number - MPACT-MB2000-01-WR.
Figure 4-6 Metal Beacon Wall Mount Bracket: MPACT-MB2000-01-WR
3. Fit the beacon’s housing into the bracket.
The barcode label should face up toward the ceiling and the smooth front of the beacon should face out toward the aisle where
the mob
ile client is expected to engage.
NOTE: Ensure the beacon in positioned correctly, because once the beacon is mounted on
the bracket it will be difficult to remove the beacon.
Mode Sleep Configuration Broadcast LED Behavior
0-2 seconds No action No action No action
2+ -5 Broadcast Broadcast Broadcast Slow flash when
button
flashes 300
ms on / 300ms off.
5+ - 10 Move to
c
onfiguration
Remain in
configuration
Move to
configuration
Fast flash – 100ms
/on & off
+ 10 Sleep Sleep Sleep Solid light
MPact AA Battery
Beacons
Indoor Wall Beacons
Wireless Bluetooth 4.0 (Bluetooth Smart)
Modes Battery Save, iBeacon, MPact, SecureCast
Beacon Channel Configurable
Beacon Interval Configurable
Dimentions 3.12” x 1.76” x 0.96”
Battery Replaceable, Standard 2 AA Batteries
Draft