User's Manual

4 - 8 MPact Location & Analytics Hardware Installation Guide
The barcode label should face up toward the ceiling and the smooth front of the beacon should face out toward the aisle where
the mobile client is expected to engage.
4.5 Beacon Battery Replacement
When a beacon’s battery life is less than 20%, the beacon should be prioritized for immediate replacement. The beacon’s
battery is located within a battery tray in the beacon’s housing.
This section includes procedures for replacing batteries for the following part numbers:
• Replacing Battery: MPACT-T1B20-000-WR and MPACT-T1B10-000-WR
• Replacing Battery: MPACT-MB2000-01-WR
4.5.1 Replacing Battery: MPACT-T1B20-000-WR and MPACT-T1B10-000-WR
To replace a beacon’s battery in part number MPACT-T1B20-000-WR and MPACT-T1B10-000-WR:
1. Remove the beacon from the shelving unit (see information on the appropriate beacon part number).
2.
With the bottom of the beacon facing up, gently lift each corner of the beacon’s battery tray.
Figure 4-8 shows the beacon battery housing for part number MPACT-T1B20-000-WR and MPACT-T1B10-000-WR and
MPACT-T1B10-000-WR. In this example, the battery tray is on the right and the corners of the battery tray are marked in
red. When gently lifting each tray corner, slightly push the each corner out to dislodge corners of the tray.
MPact USB
Beacons
USB Powered Beacons
Wireless Bluetooth 4.0 (Bluetooth Smart)
Modes iBeacon, MPact, SecureCast
Beacon Channel Configurable
Beacon Interval Configurable
Dimentions 0.57” X 0.27” X . 0.80”
Battery Powered by any USB adaptor
Transmit Power 4 dBm to -23 dBm
Configurable from 4 dBm to -23 dBm
Antenna Type OmniDirectional Antenna
Operating
Temperature
32° F to 104° F/0° C to 40° C
Transmit Range 15 ft. to 120 ft./4.57 m to 36.58 m, line of sight
Power Change 1 dB increments
Battery Life N/A - Powered by USB
Draft