User's Manual

User Guide
________________________________________________________________________________________________ 6
User Guide for Wireless 802.11 Network Mini PCI Adapter
D1704 Rev A
©2010 Zebra Enterprise Solutions. All product names and numbers are Zebra Enterprise Solutions trademarks. All other trademarks are the property of their respe ctive owners.
1 INTRODUCTION
This mini PCI adapter is manufactured by Compex Systems. It contains a dual-mode single chip
MAC/BB/Radio for IEEE 802.11a, 11g, and 11b Wireless LAN. It can support high-speed data
transmission of up to 54 Mbps in the 2.4 GHz and 5 GHz frequency bands based on 802.11b/g and
802.11a mode respectively. Only 802.11b/g mode is used when the device is installed in ZES
products. This PCI adapter has been originally certified with 2-dBi dipole antenna by Compex.
ZES has re-certified this card with FCC and IC for use with higher gain antennas, which are listed in
section 3.
2 INSTALLATION
ATTENTION: The mini PCI card is sensitive to ESD. Perform the
following steps in ESD controlled areas and use applicable procedures
for handling ESD sensitive devices.
2.1 Ensure that the power to the host equipment is turned off. Connect the antenna
cable to connector marked MAIN on the card.
MAIN
C
Cable to Antenna