User's Manual Part 1

Operations
Load Media in Rewind Mode
60
P1009874-001 Xi4 User Guide 2/23/09
11. If your printer includes a media dancer assembly (1), thread the media under the media
dancer assembly roller. For all printers, thread the media under the media guide roller (
2)
and then the upper media sensor (
3).
12. Push the media forward until it passes under the printhead assembly (1), under the
snap plate (
2), and then over the platen roller (3).
Important • Make sure that you thread the media under these components. If you thread
the media over the them, the media obstructs the ribbon sensor and causes a false
RIBBON OUT error.
2
3
1
1
3
2