Datasheet

150 Zebra P630i & P640i Card Printer Service Manual 980006-001 Rev. A
Troubleshooting
Adjustment Procedures
4.10.4.9 Laminator Parameters in the Driver
To access the Status screen, select Start > Printers and Faxes. Right click on the Zebra P630i
or Zebra P640i printer listing. Select Properties > Device Settings > Control > Advanced
Utilities > Show Sensor Data
1. Heater Temperatures -Temperatures measured by thermocouples in the top and bottom
laminator heater cores.
2. Laminate Sensors - Reflective sensors that detect the presence of laminate on the transfer
rollers. The threshold numbers are:
• Lam Present Threshold = Below 124 (laminate present)
• Lam Absent Threshold = Above 140 (laminate absent)
The threshold numbers are not adjustable.
Accurate positioning of the laminate sensors is essential! If they do not detect laminate
reliably, performance of the entire printer is compromised.