User Manual

Standard features
Print methods: Thermal transfer or direct thermal•
32 bit 133 Mhz RISC processor•
8 MB Flash memory—including 2.0 MB •
user-available non-volatile memory storage
for downloadable objects
Internal real-time clock•
Advanced label/media counters•
Auto calibration—printer calibrates when printer •
is turned on or when printhead is closed using
approximately two labels
Early warning systems—provide low label, low •
ribbon and clean printhead alerts via the front panel
and ZebraLink alerts
New full-function front panel and large multilingual •
back-lit LCD display—with user-programmable
password protection
Clear media side door—easy monitoring of supplies •
usage without opening the printer systems
Thin film printhead with Element Energy Equalizer™ •
(E
3
™) for superior print quality
Serial RS-232 and bi-directional parallel ports—with •
auto detect
Internal ZebraNet•
®
10/100 Print Server (Ethernet)
Dual media sensors—transmissive and reflective, •
selectable through software or front panel
Operating characteristics
Environment
Operating Temperature: •
40° F/5° C to 105° F/40° C (Thermal Transfer)
32° F/0° C to 105° F/40° C (Direct Thermal)
Storage/Transport Environ.: •
-40° F/-40° C to 140° F/60° C
Operating Humidity: 20-85% non-condensing•
Storage Humidity: 5-85% non-condensing•
Electrical
Universal power supply with power-factor correction •
90-264 VAC; 48-62 Hz
Serial RS-232 and bi-directional parallel ports—with •
auto detect
USB 2.0 port•
Agency approvals
IEC 60950-1, EN 55022 Class B, EN 55024, EN •
61000-3-2, EN 61000-3-3
Media characteristics
Labels
Max. Roll Size: 8"/203 mm O.D. on a 3"/76 mm •
I.D. core
Thickness (label & liner): .003"/.076 mm to •
.012"/.305 mm
Media Types: Continuous fanfold, die-cut or black •
mark
For optimum print quality and printer performance, •
use genuine Zebra™ supplies.
Ribbons
Ribbon is recommended to be at least as wide as •
media.
Max. Roll Size: 3.2"/81.3 mm O.D. on a 1"/25.4 mm •
I.D. core
Standard Lengths: 1,476'/450 m or 984'/300 m; •
provides 3:1 & 2:1 media roll to ribbon ratios
Ribbon Setup: Ribbon wound ink side out•
ZebraLink Solutions
Software
ZebraDesigner™ Pro•
ZebraDesigner•
ZebraDesigner for XML•
ZebraNet™ Utilities v 7.0•
ZebraNet Bridge Enterprise•
Zebra Enterprise Connector•
Networking
ZebraNet•
®
Internal Wireless Plus
ZebraNet Wireless Plus Print Server•
ZebraNet 10/100 Print Server•
Firmware
ZPL•
®
or ZPL II
®
programming language—selectable
through software or front panel
XML-Enabled printing—direct-connect integration for •
bar code label printing; eliminates license fees and
print server hardware and lowers customization and
programming costs
Unicode™-compliant Global Printing •
ZBI 2.1™—Allows printers to run applications, •
prompt users through control-panel commands and
use files stored on the printer as a data source.
Fonts/graphics/symbologies
Fonts and character sets
Bitmap fonts A through H and GS symbols are •
expandable up to 10 times; height and width
independent
Smooth, scalable font Ø (CG Triumvirate™ Bold •
Condensed) is expandable dot-by-dot; height and
width independent
IBM•
®
Code Page 850 International Characters
Contains UFST•
®
from Montotype Imaging, Inc.
Graphic features
Supports user-defined fonts and graphics—including
custom logos
Bar code symbologies
Linear Bar Codes: Code 11, Code 39, Code 93, Code •
128 with subsets A/B/C and UCC Case C Codes,
ISBT-128, UPC-A, UPC-E, EAN-8, EAN-13, UPC
and EAN 2 or 5 digit extensions, Plessey, Postnet,
Standard 2-of-5, Industrial 2-of-5, Interleaved 2-of-5,
Logmars, MSI, Codabar, Planet Code
2-Dimensional: Codablock, PDF417, Code 49, Data •
Matrix, MaxiCode, QR Code, MicroPDF417, TLC 39,
GS1 DataBar (RSS), Aztec
Options and accessories
Rewind•
Cutter and catch tray•
Bi-fold media door with clear panel•
Media supply spindle for 3"/76 mm core or 40 mm •
core
Applicator interface•
64 MB On-Board Linear Flash Memory•
Scalable and international fonts•
For optimal printing quality and proper printer
performance across our product line, Zebra strongly
recommends the use of genuine Zebra™ supplies
as part of the total solution. Specifically, the Xi4
printer is designed to work only with genuine Zebra™
printheads, thus maximizing safety and print quality.
GSA#: GS-35F-0268N
P1017278 (9/09)
Specifications at a glance*
*Specifications subject to change without notice.
©2009 ZIH Corp. ZebraLink, ZebraDesigner, ZebraNet, Element Energy Equalizer, E
3
and all product names and numbers are Zebra trademarks, and Zebra, the Zebra head graphic, ZebraNet, ZPL, and ZPL II are registered
trademarks of ZIH Corp. All rights reserved. IBM is a trademark or registered trademark of International Business Machines Corporation in the United States, other countries, or both. CG Triumvirate and UFST are trademarks of
Monotype Imaging, Inc. and may be registered in certain jurisdictions. All other trademarks are property of their respective owners.
www.zebra.com
Corporate Headquarters Asia-Pacific Headquarters EMEA Headquarters Latin America Headquarters
[phone] [phone] [phone] [phone]
E-mail: [e-mail] E-mail: [e-mail] E-mail: [e-mail] E-mail: [e-mail]
Locations
USA: California, Georgia, Rhode Island, Texas, Wisconsin Europe: France, Germany, Italy, Netherlands, Poland, Spain, Sweden Asia Pacific:
Australia, China, India, Japan, South Korea Latin America: Argentina, Brazil, Florida (USA), Mexico Africa/Middle East: Russia, South Africa,
United Arab Emirates