User's Manual
Table Of Contents
- Declaration of Conformity
- Contents
- About This Document
- Introduction
- Printer Setup
- Operations
- Configuration
- Routine Maintenance
- Troubleshooting
- Specifications
- End User License Agreement
- Glossary
- Index
Operations
Load Media in Peel-Off Mode
52
P1009874-002 Xi4™/RXi4™ User Guide 1/7/10
9. Extend approximately 36 in. (920 mm) of media out of the printer. Remove and discard
the labels from this exposed media.
10. Remove the hook from the rewind spindle.
11. If you are using a core, slide it onto the rewind spindle until it is flush against the guide
plate.
Note • A core is not required.