Service manual

TRADEMARKS
LP 2824, TLP 2824, LP 2844, TLP 2844 and 2443 are service marks of Zebra Technologies
Corporation. Windows and MS-DOS are registered trademarks of Microsoft Corp. All other marks
are trademarks or registered trademarks of their respective holders.
OPERATOR CAUTIONS AND WARNINGS
These pages describe general safety and maintenance procedures that an operator must follow.
They are referenced throughout the service manual. The manual may include other warnings and
cautions not displayed here.
Warning - Shock Hazard
The printer should never be operated in a location where it can get wet.
Personal injury could result.
Warning - Static Discharge
The discharge of electrostatic energy that accumulates on the surface of
the human body or other surfaces can damage or destroy the print head or
electronic components used in this device. TAKE ANTI-STATIC
PRECAUTIONS before handling the print head or the electronic
components under the print head assembly.
Caution - Printer Setup & Handling
1)When installing or modifying the printer setup or configuration,
ALWAYS TURN POWER OFF Before
:
A) Connecting any cables.
B) Performing any cleaning or maintenance operations.
C) Moving the printer.
2) Damage to the printer interface connector, accessories or enclosure
may result from placing the printer on it’s front bezel or backside during
unpacking or handling.
iv 980358-001 Rev. A