Datasheet

Z-Band® Direct
Printable patient wristbands
Direct Thermal - self adhesive fastening
Description:
65641RM is an 81 micron white top coated direct thermal polypropylene facestock with a
permanent acrylic adhesive and a 38 micron polyester liner. This material is converted into direct
thermal pressure sensitive bar code identification wristbands.
Application
• Identification correcte et sécurisée du patient à l'hôpital
Key features and benefits
Ease of use, ribbon-less printing, no ribbon loading required
Patented Anit-microbial coating kills common bacteria including Staphylococcus aureus,
pseudomonas aeruginosa and Escherichia coli bacteria
Meets healthcare patient identification and safety requirements
Adhesive complies with FDA 21 CFR 175.105
Excellent print quality down to 5 mil narrow bar codes
UV overvarnish is applied over print area on wristbands, providing excellent resistance to water,
soaps, foam soaps, lotions, alcohol and other anti-bacterial cleaning agents
Secure closure with high performance acrylic adhesive, bands cannot be removed and reapplied
Latex-free, no latex used in raw material processing
Technical Specifications
Description Caliper
Facestock top -coated white direct thermal polypropylene film 81 microns
Adhesive high performance acrylic adhesive 25.4 microns
Liner print treated polyester 38.1 microns
Total 144.5 microns
Recommended Storage Conditions: 6 months duration when stored between 0°C and
21°C at 35% to 50% RH
Fr