Specifications

The format for the ^B4 instruction is:
^B4o,h,f,m
where
^B4 = Code 49 Bar Code
o = Orientation
Default value: Current ^FW value
(^FW defaults to N = Normal at power-up)
Other values:
R = Rotated (90 Degrees Clockwise)
I = Inverted (180 Degrees)
B = Bottom (270 Degrees - Read from bottom up)
h = Height Multiplier of Individual Rows
Defined: This number, multiplied by the module,
equals the height of the individual rows in dots.
Default value: Value set by ^BY
Other values: 1 to height of label.
NOTE: 1 is not a recommended value.
f = Print Interpretation Line
Default value:N=Noline printed.
Other values:
A = Print interpretation line above code.
B = Print interpretation line below code.
NOTE: When the code is greater than 2 rows,
expect interpretation line to extend well beyond
right edge of the code.
m = Starting Mode
Default value: A = Automatic Mode. Printer deter-
mines starting mode by analyzing field data.
Other values:
0 = Regular Alphanumeric Mode
1 = Multiple Read Alphanumeric
2 = Regular Numeric Mode
3 = Group Alphanumeric Mode
4 = Regular Alphanumeric Shift 1
5 = Regular Alphanumeric Shift 2
ZPL II COMMAND REFERENCE 109
C
O
M
M
A
N
D
R
E
F
E
R
E
N
C
E