Specifications

The format for the ^FB instruction is:
^FBa,b,c,d,e
where
^FB = Define Field Block
a = Width of Text Block Line in Dots
Valid data: Minimum = one character width.
Maximum = label width.
Default value: =0
Acceptable values: 0 - 9999
NOTE: If value is less than font width or not specified,
text block will not print.
b = Maximum Number of Lines in Text Block
Default value: 1 line
Acceptable values: 1 - 9999.
NOTE: Text exceeding the maximum number of lines
will overwrite the last line. Changing the font size will
automatically increase or decrease the size of the
block.
c = Add or Delete Space Between Lines in Dots
Default value: =0
Acceptable values: -9999 to +9999
NOTE: Numbers are considered to be positive unless
preceded by a minus sign. Positive values add space;
negative values delete space.
d = Justification of Text in Block
Default value: = L (Left)
Acceptable values: L (Left), C (Center),
J (Margin to Margin) and R (Right)
NOTE: Last line is “left justified” if “J” is used.
e = Secondary Left Margin. How far, in dots, second and all
remaining lines in text block will be indented.
Acceptable values: 0 - 9999
ZPL II COMMAND REFERENCE 215
C
O
M
M
A
N
D
R
E
F
E
R
E
N
C
E