Specifications

Network Connect
The ~NC (Network Connect) instruction is used to connect a particu-
lar printer into the network by calling up the printer’s Network ID
Number.
The format for the ~NC instruction is:
~NC#
where
~NC = Network Connect
# = The Network I.D. Number Assigned to the Printer
Default value: 000 (same as None)
Acceptable values: 001–250
Use this instruction at the beginning of any label format to specify
which printer on the network is to be used. This instruction MUST be
included in all label formats to “wake up the printer.” This number
must be three digits in length.
ZPL II COMMAND REFERENCE 297
C
O
M
M
A
N
D
R
E
F
E
R
E
N
C
E
~NC